Aluminum Alloy 3004 Data Sheet
See the full list of United Aluminum Alloys Here
Alloy Group: 3XXX
PRINCIPAL ALLOYING ELEMENT: Manganese and Magnesium
ALUMINUM ALLOY 3004 GENERAL DESCRIPTION:
What is Aluminum 3004?
Aluminum 3004 is a medium strength aluminum alloy with manganese and magnesium as its primary alloying elements. It has higher strength than 3003 alloy but lower ductility.
CHEMICAL COMPOSITION LIMITS:
Compositions are listed as weight percent. Limits are given as a maximum unless indicated as a range.
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others-Each |
Others Total |
Al Min |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3004 |
0.30 |
0.7 |
0.25 |
1.0-1.5 |
0.8-1.3 |
– |
0.25 |
0.25 |
0.05 |
0.15 |
Remainder |
Composition according to Aluminum Association
TYPICAL MECHANICAL PROPERTIES DATA of ALUMINUM 3004:
The following typical aluminum 3004 properties are not guaranteed since in most cases they are average for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes.Source: Aluminum Standards & Data and United Aluminum data base
| Alloy-Temper |
Tensile Strength (ksi) |
Yield Strength (ksi) |
Elongation (%) |
|---|---|---|---|
| 3004-O |
26 |
10 |
19 |
| 3004-H34 |
39 |
29 |
5 |
| 3004-H38 |
41 |
36 |
4 |
